WIKI

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
** Up2 Squared board **\\
http://www.up-board.org/upsquared/

openssl speed:
<code>
</code>

CPU:
<code>
Architecture:        x86_64
CPU op-mode(s):      32-bit, 64-bit
Byte Order:          Little Endian
CPU(s):              4
On-line CPU(s) list: 0-3
Thread(s) per core:  1
Core(s) per socket:  4
Socket(s):           1
NUMA node(s):        1
Vendor ID:           GenuineIntel
CPU family:          6
Model:               92
Model name:          Intel(R) Pentium(R) CPU N4200 @ 1.10GHz
Stepping:            9
CPU MHz:             913.440
CPU max MHz:         2500.0000
CPU min MHz:         800.0000
BogoMIPS:            2189.00
Virtualization:      VT-x
L1d cache:           24K
L1i cache:           32K
L2 cache:            1024K
NUMA node0 CPU(s):   0-3
Flags:               fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology tsc_reliable nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 ds_cpl vmx est tm2 ssse3 sdbg cx16 xtpr pdcm sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave rdrand lahf_lm 3dnowprefetch cpuid_fault cat_l2 intel_pt tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust smep erms mpx rdt_a rdseed smap clflushopt sha_ni xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts
</code>

eMMC speed:
<code>
/dev/mmcblk0:
 Timing buffered disk reads: 854 MB in  3.00 seconds = 284.31 MB/sec
</code>

mSATA 128 GB speed:
<code>
/dev/sda:
 Timing buffered disk reads: 1204 MB in  3.00 seconds = 401.14 MB/sec
</code>
WIKI

User Tools

Site Tools

Page Tools
